process finished with exit code 2 pycharm что это
Не работает Pycharm
Не работает Pycharm, причём сам питон (IDLE) установлен и работает правильно. Что с этим поделать? Пробовал также PyScripter.
Тоже не работает. Пишет что Python не найден. Хотя он у меня установлен, и через среду IDLE (ту что в комплекте с питоном) всё работает нормально.
Добавлено через 2 минуты
Python was not found but can be installed from the Microsoft Store: https://go.microsoft.com/fwlink?linkID=2082640
Process finished with exit code 9009
Вот что пишет Pycharm
Не работает автодополнение в PyCharm
Всем привет. Не работает автодополнение в PyCharm. Вообще. Даже на слова print или import. Путь к.
PyCharm: не работает автокомплит Qt
Установил PyCharm, до этого уже была поставлена библиотека PyQt4. Отказывается работать.
В питоне 3 работает а в Pycharm нет
stringvar1 = StringVar(root) stringvar2 = StringVar(root) stringvar3 =.
Не работает python console в pycharm
Впервые установил pycharm 2016.3.2 на macOS и Python 3.6. Но почему-то не получается ничего.
Решение
В PATH у тебя два пути ссылающиеся на Python. Причем первый это просто ссылка на Microsoft Store. Удали его или просто поменяй местами со вторым путем, который указывает на твой установленный Python.
В PyCharm в настройках указывающих интерпретатор, также укажи правильный путь.
P.S. Нельзя заниматься программированием, если не понимаешь таких элементарных вещей.
Гугл прикрыли поди.
Intellisense в PyCharm не работает при импорте своих модулей
Всем привет! У меня давний трабл, но как-то думал, а ладно фиг с ним, можно и без этого.
Не работает клава на PyCharm
Установил сегодня IDE PyCharm, ничего нельзя ввести с клавиатуры. Сама клавиатура исправна и.
Pycharm работает очень медленно
Доброго времени суток. Скачал pycharm последнюю версию с офф. сайта. Установил jdk 8 по следующей.
Pycharm + GAE + Django, не работает отладка TypeScript в IDE
Ребят, подскажите в чем беда: Есть GAE проект, third-party библиотекой подключен Django, отладка.
PyCharm
Похожая проблема с библиотекой. Третий день мучаюсь, установил Python по инструкции, подключил.
Pycharm
У меня в Pycharm, когда я открываю новый файл, курсор становится выделенным, то бишь insert. Как.
Что делать с ошибкой Process finished with exit code 1 при запуске бота для дискорда?
Пытался написать самого простого бота для дискорда, но выдает ошибку. Как ее исправить?
Traceback (most recent call last):
File «/Users/amirdavlatov/Desktop/Боты/эхо бот/venv/lib/python3.8/site-packages/aiohttp/connector.py», line 936, in _wrap_create_connection
return await self._loop.create_connection(*args, **kwargs) # type: ignore # noqa
File «/Library/Frameworks/Python.framework/Versions/3.8/lib/python3.8/asyncio/base_events.py», line 1050, in create_connection
transport, protocol = await self._create_connection_transport(
File «/Library/Frameworks/Python.framework/Versions/3.8/lib/python3.8/asyncio/base_events.py», line 1080, in _create_connection_transport
await waiter
File «/Library/Frameworks/Python.framework/Versions/3.8/lib/python3.8/asyncio/sslproto.py», line 529, in data_received
ssldata, appdata = self._sslpipe.feed_ssldata(data)
File «/Library/Frameworks/Python.framework/Versions/3.8/lib/python3.8/asyncio/sslproto.py», line 189, in feed_ssldata
self._sslobj.do_handshake()
File «/Library/Frameworks/Python.framework/Versions/3.8/lib/python3.8/ssl.py», line 944, in do_handshake
self._sslobj.do_handshake()
ssl.SSLCertVerificationError: [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: unable to get local issuer certificate (_ssl.c:1108)
The above exception was the direct cause of the following exception:
Comments
idohi commented Nov 1, 2018 •
Bug report
Is there properly solution like new matplotlib version with a fix for this issue?
Code for reproduction
Actual outcome
Code with work a round
Expected outcome
Matplotlib version
The text was updated successfully, but these errors were encountered:
jklymak commented Nov 1, 2018
Don’t see how we can help with this. Whatever backend pycharm uses must be causing the problem. If you can isolate an issue to matpltolob feel free to reopen.
tacaswell commented Nov 1, 2018
@idohi Do you get any traceback or just the non-zero exit code?
I am confused by your suggested fix though as the matplotlibrc file is not interpreted as python code so adding those lines should have no effect.
ImportanceOfBeingErnest commented Nov 1, 2018
I noted that you report the backend to be Qt5Agg and your python version as 2.7. While it seems possible to get pyqt5 running on py2, this is pretty non-standard and would require a lot of tweaks and a manual build process (as far as I know).
I think pandas tries to import matplotlib at some point (they wanted to get rid of that, but that just broke at lot), and when matplotlib cannot load the qt5agg backend, because pyqt5 is not installed or worse, half-installed, it might fail with a non-zero exit code. There might be some traceback hidden, which PyCharm does not display?
idohi commented Nov 1, 2018
Comments
idohi commented Nov 1, 2018 •
Bug report
Is there properly solution like new matplotlib version with a fix for this issue?
Code for reproduction
Actual outcome
Code with work a round
Expected outcome
Matplotlib version
The text was updated successfully, but these errors were encountered:
jklymak commented Nov 1, 2018
Don’t see how we can help with this. Whatever backend pycharm uses must be causing the problem. If you can isolate an issue to matpltolob feel free to reopen.
tacaswell commented Nov 1, 2018
@idohi Do you get any traceback or just the non-zero exit code?
I am confused by your suggested fix though as the matplotlibrc file is not interpreted as python code so adding those lines should have no effect.
ImportanceOfBeingErnest commented Nov 1, 2018
I noted that you report the backend to be Qt5Agg and your python version as 2.7. While it seems possible to get pyqt5 running on py2, this is pretty non-standard and would require a lot of tweaks and a manual build process (as far as I know).
I think pandas tries to import matplotlib at some point (they wanted to get rid of that, but that just broke at lot), and when matplotlib cannot load the qt5agg backend, because pyqt5 is not installed or worse, half-installed, it might fail with a non-zero exit code. There might be some traceback hidden, which PyCharm does not display?
idohi commented Nov 1, 2018
Что делать с ошибкой Process finished with exit code 1 при запуске бота для дискорда?
Пытался написать самого простого бота для дискорда, но выдает ошибку. Как ее исправить?
Traceback (most recent call last):
File «/Users/amirdavlatov/Desktop/Боты/эхо бот/venv/lib/python3.8/site-packages/aiohttp/connector.py», line 936, in _wrap_create_connection
return await self._loop.create_connection(*args, **kwargs) # type: ignore # noqa
File «/Library/Frameworks/Python.framework/Versions/3.8/lib/python3.8/asyncio/base_events.py», line 1050, in create_connection
transport, protocol = await self._create_connection_transport(
File «/Library/Frameworks/Python.framework/Versions/3.8/lib/python3.8/asyncio/base_events.py», line 1080, in _create_connection_transport
await waiter
File «/Library/Frameworks/Python.framework/Versions/3.8/lib/python3.8/asyncio/sslproto.py», line 529, in data_received
ssldata, appdata = self._sslpipe.feed_ssldata(data)
File «/Library/Frameworks/Python.framework/Versions/3.8/lib/python3.8/asyncio/sslproto.py», line 189, in feed_ssldata
self._sslobj.do_handshake()
File «/Library/Frameworks/Python.framework/Versions/3.8/lib/python3.8/ssl.py», line 944, in do_handshake
self._sslobj.do_handshake()
ssl.SSLCertVerificationError: [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: unable to get local issuer certificate (_ssl.c:1108)
The above exception was the direct cause of the following exception: