raw githubusercontent что это

What do raw.githubusercontent.com URLs represent?

I can’t find the install file on GitHub. Where is it?

raw githubusercontent что это. Смотреть фото raw githubusercontent что это. Смотреть картинку raw githubusercontent что это. Картинка про raw githubusercontent что это. Фото raw githubusercontent что это

3 Answers 3

The raw.githubusercontent.com domain is used to serve unprocessed versions of files stored in GitHub repositories. If you browse to a file on GitHub and then click the Raw link, that’s where you’ll go.

The URL in your question references the install file in the master branch of the Homebrew/install repository. The rest of that command just retrieves the file and runs ruby on its contents.

raw githubusercontent что это. Смотреть фото raw githubusercontent что это. Смотреть картинку raw githubusercontent что это. Картинка про raw githubusercontent что это. Фото raw githubusercontent что это

There are two ways of looking at github content, the «raw» way and the «Web page» way.

raw.githubusercontent.com returns the raw content of files stored in github, so they can be downloaded simply to your computer. For example, if the page represents a ruby install script, then you will get a ruby install script that your ruby installation will understand.

To see the content of raw.githubusercontent.com/$/$/$/$ in the usual github interface:

In this case, the user is «Homebrew», the repo is «install», the branch name is «master» (which is a very common branch name). You insert «blob» between «install» and «master», so

This is the reverse of finding a file on Github and clicking the Raw link.

Источник

Постоянная блокировка raw.githubusercontent.com

Здравствуйте! Последнюю неделю постоянно вылезает сообщение «URL заблокирован; ULR raw.githubusercontent.com; Причина Источник распространения вирусов».

Вылезает такое сообщение кучу раз за день при заходе на любой сайт и жутко раздражает.

Кто-то сталкивался с таким? Гугл с яндексом ничего не находят по теме.

Это баг такой или фича? А может какой-то вирус у меня?

Полная проверка ничего нового не показала.

P.s. Dr. Web Security Space 11.5, Win 7×64, Firefox 66.0.5 (x64)

Прикрепленные файлы:

Тему перемещаю в «Помощь по лечению».

Почитайте правила этого раздела и выложите сюда все логи, которые там указаны.


меня вот что возмутило. что даже не начинают толком диалог сразу дампы. © alehas777

Прилагаю логи. Если чего то не хватает, то напишите, что еще нужно. В правилах раздела помощь не все понятно написано к сожалению.

Прикрепленные файлы:

Не знаю, либо github.com взломали либо ложняк на IP 151.101.36.133

Не знаю, либо github.com взломали либо ложняк на IP 151.101.36.133

На github.com сработки нет, а на 151.101.36.133 есть.

Только ТС пишет, что сообщение вылазит при заходе на другие сайты.

Прилагаю отчет dwsysinfo.exe и отчет самой последней полной проверки сканера.

Явление пока остается. Срабатывает даже на этом форуме.

Отчеты на форум прикрепить не дает (много весят) поэтому залиты на яндекс:

^В моем реестре таких ключей нет.

^В моем реестре таких ключей нет.


меня вот что возмутило. что даже не начинают толком диалог сразу дампы. © alehas777

Нет, не знакомы. Вручную ничего не указывали, в параметрах сети стоит автоопределение dns. Я вообще с трудом понимаю, что это такое.

1) У Вас есть следы блокировки софта на уровне политик. Если это делали не Вы, то надо все поудалять:

Плюсом будет проверить ветки реестра:
HKEY_LOCAL_MACHINE\Software\Microsoft\SystemCertificates\Disallowed\Certificates\

Если что-то есть, удалить. По отчету там есть как минимум залоченный сертификат от D-Link:
HKEY_LOCAL_MACHINE\Software\Microsoft\SystemCertificates\Disallowed\Certificates\3EB44E5FFE6DC72DED703E99902722DB38FFD1CB

3) По повоу DNS пардон, не в тот отчет посмотрел. Тут все чисто.

4) Сам коннект идет от браузера. Это Вы сами заходите на github? В настройках Firefox прописаны всякие прокси, правда на локальный адрес.

Все сделано. В груповых политиках ничего нет вообще. Реестр почищен. Hosts тоже почищен. Прокси в firefox отключены и не используются вообще. Проблема осталась.

Сообщение о блокировке githubusercontent.com вылезает на других сайтах (youtube, vk, яндекс и т.д.).

При попытке зайти на githubusercontent.com, raw.githubusercontent.com и любоедругоеслово.githubusercontent.com вылезает сообщение о блокировке.

На opera протестировали, вылезает гораздо реже, но тоже вылезает.

Прикрепленные файлы:

а вариант с убиранием 151.101.36.133 их базы малвари как фолса не рассматриваем?

Не должно ж оно без ведома пользователя туда лезть.


меня вот что возмутило. что даже не начинают толком диалог сразу дампы. © alehas777

lisaiv, сервер DNS от Ядекса dns.yandex.ru используете?

Определение DNS в сети стоит автоматическое. Т.е. получается, что идет от провайдера. Провайдер Билайн. Возможно у них как раз dns от Яндекса.

Кстати реально вопрос, почему так часто что-то лезет на этот githubusercontent?

Определение DNS в сети стоит автоматическое. Т.е. получается, что идет от провайдера. Провайдер Билайн. Возможно у них как раз dns от Яндекса.

Кстати реально вопрос, почему так часто что-то лезет на этот githubusercontent?

Источник

How To Create A GitHub Profile?

raw githubusercontent что это. Смотреть фото raw githubusercontent что это. Смотреть картинку raw githubusercontent что это. Картинка про raw githubusercontent что это. Фото raw githubusercontent что это

Nov 4, 2020 · 5 min read

This blog presents all the steps that you need to create a nice GitHub profile. There are several steps that you need to do to create your GitHub profile.

As you can see this is my GitHub profile and you can see this is basically a readme displayed on my homepage. So all you need is to create this readme file in your repo!

raw githubusercontent что это. Смотреть фото raw githubusercontent что это. Смотреть картинку raw githubusercontent что это. Картинка про raw githubusercontent что это. Фото raw githubusercontent что это

Step 1. Create a new repository and name it with your GitHub username.

When you use your username as the repository name, a green area shows up and tells you that this is a special repo. Mine profile already exists, that is why it shows the red words.

raw githubusercontent что это. Смотреть фото raw githubusercontent что это. Смотреть картинку raw githubusercontent что это. Картинка про raw githubusercontent что это. Фото raw githubusercontent что это

Step 2. Create a README.md file in that repo.

T h is step is the most important. First, you need to collect and download some necessary icons and some programming language’s logos.

Step 3. Design your GitHub Repo!

Background Cover & Introduction

You can download an image for your background cover and commit this to your repo and add it to the top of your profile.

If you want to embed text then you can use [the name of your project](the link of your project)

If would like to add some Emoji, you can visit this link and copy & paste the one you want to use.

raw githubusercontent что это. Смотреть фото raw githubusercontent что это. Смотреть картинку raw githubusercontent что это. Картинка про raw githubusercontent что это. Фото raw githubusercontent что это

The “Connect with me” part

As you can see that there are three different logos LinkedIn, Medium, and 1000hires. So you need to download those images and commit those to your special repo. Or you can simply use the images that I uploaded to my repo.

raw githubusercontent что это. Смотреть фото raw githubusercontent что это. Смотреть картинку raw githubusercontent что это. Картинка про raw githubusercontent что это. Фото raw githubusercontent что это

Then you can use this [ ](Your own LinkedIn) to link your own LinkedIn.

I added my LinkedIn, Medium, and 1000hires Video. You can use simply change the links in the ( ).

Languages and Tools

In this part, I also used a similar method to embed images and to list the programming languages and tools.

For the last four (4), I uploaded the icons to my repo and use the link of the icons to embed them.

raw githubusercontent что это. Смотреть фото raw githubusercontent что это. Смотреть картинку raw githubusercontent что это. Картинка про raw githubusercontent что это. Фото raw githubusercontent что это

If you are a software Engineer or Front-end Developer, you may need to show other languages and tools such as CSS3, HTML, SASS, JavaScript, React, etc.

You can just simply copy and paste the code as follows-

If you change it to preview mode, you can see as follows:

raw githubusercontent что это. Смотреть фото raw githubusercontent что это. Смотреть картинку raw githubusercontent что это. Картинка про raw githubusercontent что это. Фото raw githubusercontent что это

Github Status

There are so many options that you can use to show your GitHub status. You can simply visit this link. There are different themes that you can choose. Here I just copy and paste the code below into my markdown content and that is it!

raw githubusercontent что это. Смотреть фото raw githubusercontent что это. Смотреть картинку raw githubusercontent что это. Картинка про raw githubusercontent что это. Фото raw githubusercontent что это

If you want to use different themes and more fancy designs, you can simply copy the code below and change the username and select the theme you like!

Источник

Raw githubusercontent что это

= pressTime then return end inviteButton.Text = «Copy Discord Invite Link (https://discord.io/infiniteyield)» end) dragGUI(main) main.Parent = PARENT ReferenceButton.MouseButton1Click:Connect(function() main:TweenPosition(UDim2.new(0.5,-250,0.5,-150), «InOut», «Quart», 0.5, true, nil) end) end)() currentShade1 = Color3.fromRGB(36, 36, 37) currentShade2 = Color3.fromRGB(46, 46, 47) currentShade3 = Color3.fromRGB(78, 78, 79) currentText1 = Color3.new(1, 1, 1) currentText2 = Color3.new(0, 0, 0) currentScroll = Color3.fromRGB(78,78,79) defaultsettings = < prefix = ';'; StayOpen = false; keepIY = false; logsEnabled = false; jLogsEnabled = false; aliases = <>; binds = <>; WayPoints = <>; PluginsTable = <>; currentShade1 = ; currentShade2 = ; currentShade3 = ; currentText1 = ; currentText2 = ; currentScroll = ; eventBinds = eventEditor.SaveData() > defaults = game:GetService(«HttpService»):JSONEncode(defaultsettings) local KeepInfYield = false nosaves = false local loadedEventData = nil function saves() if writefileExploit() then if pcall(function() readfile(«IY_FE.iy») end) then if readfile(«IY_FE.iy»)

= nil then local success, response = pcall(function() local json = game:GetService(«HttpService»):JSONDecode(readfile(«IY_FE.iy»)) if json.prefix

= nil then prefix = json.prefix else prefix = ‘;’ end if json.StayOpen

= nil then StayOpen = json.StayOpen else StayOpen = false end if json.keepIY

= nil then KeepInfYield = json.keepIY else KeepInfYield = false end if json.logsEnabled

= nil then logsEnabled = json.logsEnabled else logsEnabled = false end if json.jLogsEnabled

= nil then jLogsEnabled = json.jLogsEnabled else jLogsEnabled = false end if json.aliases

= nil then aliases = json.aliases else aliases = <> end if json.binds

= nil then binds = json.binds else binds = <> end if json.spawnCmds

= nil then spawnCmds = json.spawnCmds end if json.WayPoints

= nil then AllWaypoints = json.WayPoints else WayPoints = <> AllWaypoints = <> end if json.PluginsTable

= nil then PluginsTable = json.PluginsTable else PluginsTable = <> end if json.currentShade1

= nil then currentShade1 = Color3.new(json.currentShade1[1],json.currentShade1[2],json.currentShade1[3]) end if json.currentShade2

= nil then currentShade2 = Color3.new(json.currentShade2[1],json.currentShade2[2],json.currentShade2[3]) end if json.currentShade3

= nil then currentShade3 = Color3.new(json.currentShade3[1],json.currentShade3[2],json.currentShade3[3]) end if json.currentText1

= nil then currentText1 = Color3.new(json.currentText1[1],json.currentText1[2],json.currentText1[3]) end if json.currentText2

= nil then currentText2 = Color3.new(json.currentText2[1],json.currentText2[2],json.currentText2[3]) end if json.currentScroll

= Enum.UserInputType.MouseButton1 then return end releaseEvent:Disconnect() pressing = false end) startNum = startNum + 1 func(startNum) while pressing do if tick()-startTime > 0.3 then startNum = startNum + 1 func(startNum) end wait(0.1) end end end) frame.ArrowFrame.Up.InputEnded:Connect(function(input) if input.UserInputType == Enum.UserInputType.MouseMovement then frame.ArrowFrame.Up.BackgroundTransparency = 1 end end) frame.ArrowFrame.Down.InputBegan:Connect(function(input) if input.UserInputType == Enum.UserInputType.MouseMovement then frame.ArrowFrame.Down.BackgroundTransparency = 0.5 elseif input.UserInputType == Enum.UserInputType.MouseButton1 then local releaseEvent,runEvent local startTime = tick() local pressing = true local startNum = tonumber(frame.Text) if not startNum then return end releaseEvent = UserInputService.InputEnded:Connect(function(input) if input.UserInputType

= Enum.UserInputType.MouseButton1 then return end releaseEvent:Disconnect() mouseEvent:Disconnect() end) mouseEvent = UserInputService.InputChanged:Connect(function(input) if input.UserInputType == Enum.UserInputType.MouseMovement then colorSpaceInput() end end) colorSpaceInput() end end) colorStrip.InputBegan:Connect(function(input) if input.UserInputType == Enum.UserInputType.MouseButton1 then local releaseEvent,mouseEvent releaseEvent = UserInputService.InputEnded:Connect(function(input) if input.UserInputType

= nil and player == viewing then workspace.CurrentCamera.CameraSubject = Players.LocalPlayer.Character viewing = nil if viewDied then viewDied:Disconnect() viewChanged:Disconnect() end notify(‘Spectate’,’View turned off (player left)’) end end) Exit.MouseButton1Down:Connect(function() logs:TweenPosition(UDim2.new(0, 0, 1, 10), «InOut», «Quart», 0.3, true, nil) end) Hide.MouseButton1Down:Connect(function() if logs.Position

= IYMouse.Target then selectionBox.Adornee = IYMouse.Target else selectionBox.Adornee = nil end end ActivateHighlight = IYMouse.Move:Connect(HighlightPart) local function SelectPart() if IYMouse.Target

= «» then toClipboard(Path.Text) else notify(‘Copy Path’,’Select a part to copy its path’) end end) ChoosePart.MouseButton1Click:Connect(function() if Path.Text

= » then newcmd:SetAttribute(«Title», CMDs[i].NAME) newcmd:SetAttribute(«Desc», CMDs[i].DESC) newcmd.MouseButton1Down:Connect(function() if newcmd.Visible and newcmd.TextTransparency == 0 then local currentText = Cmdbar.Text Cmdbar:CaptureFocus() autoComplete(newcmd.Text,currentText) maximizeHolder() end end) end end IndexContents(»,true) function checkTT() local t local guisAtPosition = COREGUI:GetGuiObjectsAtPosition(IYMouse.X, IYMouse.Y) for _, gui in pairs(guisAtPosition) do if gui.Parent == CMDsF then t = gui end end if t

= nil and t:GetAttribute(«Title»)

= nil then Title_3.Text = t:GetAttribute(«Title») else Title_3.Text = » end Tooltip.Visible = true else Tooltip.Visible = false end end function FindInTable(tbl,val) if tbl == nil then return false end for _,v in pairs(tbl) do if v == val then return true end end return false end function GetInTable(Table, Name) for i = 1, #Table do if Table[i] == Name then return i end end return false end function respawn(plr) if invisRunning then TurnVisible() end local char = plr.Character if char:FindFirstChildOfClass(«Humanoid») then char:FindFirstChildOfClass(«Humanoid»):ChangeState(15) end char:ClearAllChildren() local newChar = Instance.new(«Model») newChar.Parent = workspace plr.Character = newChar wait() plr.Character = char newChar:Destroy() end local refreshCmd = false function refresh(plr) refreshCmd = true local Human = plr.Character and plr.Character:FindFirstChildOfClass(«Humanoid», true) local pos = Human and Human.RootPart and Human.RootPart.CFrame local pos1 = workspace.CurrentCamera.CFrame respawn(plr) task.spawn(function() plr.CharacterAdded:Wait():WaitForChild(«Humanoid»).RootPart.CFrame, workspace.CurrentCamera.CFrame = pos, wait() and pos1 refreshCmd = false end) end local lastDeath function onDied() task.spawn(function() if pcall(function() Players.LocalPlayer.Character:FindFirstChildOfClass(‘Humanoid’) end) and Players.LocalPlayer.Character:FindFirstChildOfClass(‘Humanoid’) then Players.LocalPlayer.Character:FindFirstChildOfClass(‘Humanoid’).Died:Connect(function() if getRoot(Players.LocalPlayer.Character) then lastDeath = getRoot(Players.LocalPlayer.Character).CFrame end end) else wait(2) onDied() end end) end Clip = true spDelay = 0.1 Players.LocalPlayer.CharacterAdded:Connect(function() NOFLY() Floating = false if not Clip then execCmd(‘clip nonotify’) end repeat wait() until getRoot(Players.LocalPlayer.Character) pcall(function() if spawnpoint and not refreshCmd and spawnpos

= nil then wait(spDelay) getRoot(Players.LocalPlayer.Character).CFrame = spawnpos end end) onDied() end) onDied() function getstring(begin) local start = begin-1 local AA = » for i,v in pairs(cargs) do if i > start then if AA

= rawCmdStr and rawCmdStr:sub(1,11)

= ‘lastcommand’ and rawCmdStr:sub(1,7)

= ‘lastcmd’ then table.insert(cmdHistory,1,rawCmdStr) end end if #cmdHistory > 30 then table.remove(cmdHistory) end lastCmds[cmdName] = v end local cmdStartTime = tick() if infTimes then while lastBreakTime cmdStartTime then break end local success,err = pcall(function() cmd.FUNC(args, speaker) end) if not success and _G.IY_DEBUG then warn(«Command Error:», cmdName, err) end if cmdDelay

= 0 then wait(cmdDelay) end end end end end end) end function addcmd(name,alias,func,plgn) cmds[#cmds+1]= < NAME=name; ALIAS=alias or <>; FUNC=func; PLUGIN=plgn; > end function removecmd(cmd) if cmd

Источник

Что представляют собой raw.githubusercontent.com URLs?

3 ответа

Что представляют собой каждый из значков окна просмотра и наложений в Visual Studio? Есть ли где-нибудь легенда на странице MSDN?

В моем окне logcat (Eclipse) некоторые тексты написаны синим цветом, другие-зеленым и оранжевым. я знаю, что когда текст красный, в моем приложении есть ошибка, которую мне нужно исправить. Что представляют собой другие цвета текста?

Есть два способа взглянуть на содержимое github: способ «raw» и способ «Web page».

raw.githubusercontent.com возвращает необработанное содержимое файлов, хранящихся в github, поэтому их можно просто загрузить на ваш компьютер. Например, если страница представляет собой сценарий установки ruby, то вы получите сценарий установки ruby, который будет понятен вашей установке ruby.

Чтобы увидеть содержимое raw.githubusercontent.com/$/$/$ в обычном интерфейсе github:

В этом случае имя ветви равно «master» (что является очень распространенным именем ветви), поэтому вы заменяете /master/ на /blob/master/ и т. Д.

Это противоположно поиску файла на Github и щелчку по необработанной ссылке.

Замените username именем пользователя, создавшего РЕПО.

Замените repo-name именем РЕПО.

Замените branch-name именем ветви.

Замените path путем к файлу.

Чтобы повернуть вспять, нужно перейти к GitHub.com:

Похожие вопросы:

Что представляют собой значения в члене mData? Похоже, что каждое значение представляет собой 4-байтовое целое число. Я предполагаю, что мой вопрос заключается в том, что должен представлять.

Я не могу найти описания того, что представляют собой конечные точки линий боксплота. Например, вот значения точек выше и ниже, где заканчиваются линии. (Я понимаю, что верхняя и нижняя части.

Что представляют собой каждый из значков окна просмотра и наложений в Visual Studio? Есть ли где-нибудь легенда на странице MSDN?

В моем окне logcat (Eclipse) некоторые тексты написаны синим цветом, другие-зеленым и оранжевым. я знаю, что когда текст красный, в моем приложении есть ошибка, которую мне нужно исправить. Что.

Я пытаюсь выяснить, что представляют собой эти двоичные числа во всех трех форматах (R, I, J). Вот номер, который мне дали, Может ли кто-нибудь объяснить, о чем они на самом деле спрашивают, потому.

Источник

Добавить комментарий

Ваш адрес email не будет опубликован. Обязательные поля помечены *